ESD Tool Bag

Basic Features

ESD Kit Bag made with soft leather of PVC, good flexility, resist burn and endure attrition; Due to append particular anti-static substance make with permanent static dissipative finished productnothing to change performance of anti-static vary with the environment and the times.

Open it will be make a static dissipative work field, it would be temporal a local performance of static.

Function Features

1. Nothing S, NH+3, Hg, Pb and etc, any injurant in the material, it can be no harm to anybody.

2. To make sure of assembly for various tools, while the operator uses tool to provide route of static dissipative.

3. Outfit assembly of grounding: one aspect fits on the wrist strap, and the other end groundsto dissipative static to mother earth, so this could dispel static of body, safeguard safety for electron products and organ.

4. You can impress on the surface with your Logo or another mark in hand.

5. Could be cleaned to lustration, and its fringe sews up with knitting, foldaway.

Using Area

When in not suitable to set up special ESD protection workaround and workbench district that it must be to operate for anti-static, it can be provide effective protection instrument. If so assist operator with progress field-work andservicing etc dealing in not specified safety products of ESD.To operate any product before, you must turn off the power.

Technical parameter

Surface resistance: 10⁶-10⁹, Volume resistance: 10⁶-10⁹, Friction voltage<100V

Size: 610*550*7.7mm

Using method

1. Would be not to pucker the work mat put it anear the table of workaround or floor board, to take out the ground wire and the snap fastener anti-static wrist strap from Kit.

2. One midst of kit ground wire to connect on the connection mast of workaround, one end the alligator clip of ground wire anear connect that need to replace or move metal surface of product, but the surface must be include a part of product-cell; another ground wire connect on the snap fastener anti-static wrist strap, also to adjust the snap fastener strap to connect bared skin.

3. Begin to work.

4. All the process wind up, to dismantle locales safety tools to pucker package renewedly.